盐穴地下储气库密封性的测试与评价

对盐穴储气库系统密封性的测试与评价方法进行了详细介绍。测试方法选取原则、测试相关计算方法以及测试标准为储气库密封性测试的工程设计提供了详实的理论基础。     

Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Relations between asphaltene content,viscosity reduction rate of heavy oil and ultrasonic parameters

Ultrasonic treatment could decrease the viscosity of heavy oil and previous study on had focused on one heavy oil sample and involved less on the influence of asphaltene content. This study examined the effect of asphaltene content on viscosity reduction rate by ultrasonication. A comparison on samples with various asphaltene content and vibration parameter was made. The results showed that the optimal vibration frequency might decrease as the asphaltene content increased, whereas the optimal vibration intensity and the optimal treatment time were suggested to be enlarged. A semi-quantitative correlation was matched, which helped for numerical simulation about ultrasonic treatment.     

碱度对熔剂性球团生球性能的影响

 熔剂性铁矿球团具有优良的高温冶金性能，是高炉炼铁的优质炉料。为探明生产熔剂性铁矿球团时碱度对生球性能的影响规律，以某钢厂赤铁精矿为原料，通过添加石灰石粉调节碱度，进行了造球及生球干燥特性试验研究。结果发现，提高碱度，生球落下强度呈提高趋势，抗压强度变化不明显，适宜膨润土配比略有下降，生球爆裂温度明显提高，生球干燥速率则没有明显变化。与基准自然碱度（R＝0.14）相比，当碱度提高到0.6以上时，适宜膨润土配比由1.2%下降到1.1%，生球爆裂温度提高近50 ℃以上。     

车辆自组织网络中新型NP-CSMA随机多址协议研究分析

智能交通的出现使得车辆自组织网络受到越来越多的关注。车辆自组织网络的动态拓扑结构变化非常剧烈,这对网络的吞吐率、传输速率等性能提出了很高的要求。提出1种具有握手机制协议的自适应多通道双时钟NP-CSMA随机多址接入协议。该协议首先区分2种P-CSMA协议,握手机制成功解决了隐藏的终端问题,双时钟机制减少了平均空闲时间,多通道机制增加通道数量和划分用户优先级的同时提高了系统吞吐率,自适应机制能够使系统在高负载下保持稳定吞吐率。还对该协议的传输速率进行了分析,得出该协议的传输速率相对较高的结论。通过平均周期方法推导吞吐率和传输速率的计算公式,仿真结果与理论推导一致。     

Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal

Constant- and varied-depth nanoscratching tests of GGG single crystal were carried out at different scratching velocities. The morphologies of the scratched grooves and chips were analysed using scanning electron microscope. The experimental results indicated that higher scratching velocity led to shallower penetration depth, shallower residual depth, and larger continuous chips. Increasing the scratching velocity could effectively improve the plasticity and reduce the brittle-to-ductile transition depth of GGG single crystal. Based on the contact stress and contact area between the analysed sample and Berkovich indenter, a model for predicting the penetration depth was developed, which took into account the strain rate effect and elastic recovery of materials. The model was verified using constant- and varied-depth nanoscratching tests, and the predicted and experimental results were in good agreement. Subsurface damage underneath the ductile surface was characterised using transmission electron microscope. The TEM results demonstrated that higher scratching velocity led to the slipping planes appearing in more directions, which prevented the generation of long slipping plane and reduced the depth of the damage layers. The plastic deformation of GGG at the scratching velocity of 100 μm/s was dominated by poly-crystalline nanocrystallites and amorphous phases, and was similar to that at the low scratching velocity. This study provided a fundamental understanding of the strain-rate dependence of surface/subsurface deformation mechanisms of GGG during ultra-precision machining.     

A macro-element strategy based upon spectral finite elements and mortar elements for transient wave propagation modeling. Application to ultrasonic testing of laminate composite materials

Proposing efficient numerical modeling tools for high-frequency wave propagation in realistic configurations, such as the one appearing in ultrasonic testing experiments, is a major challenge, especially in the perspective of inversion loops or parametric studies. We propose a numerical methodology addressing this challenge and based upon the combination of the spectral finite element method and the mortar element method. From a prior decomposition of the scene of interest into “macro-elements,” we show how one can improve the performances of the standard finite element procedures in terms of memory footprint and computational load. Additionally, using this decomposition, we are able to efficiently reconstruct important modeling features on-the-fly, such as orientations of anisotropic materials or splitting directions of perfectly matched layers formulations, altogether in a robust and efficient manner. We believe that this strategy is particularly suitable for parametric studies and sensitivity analysis. We illustrate our strategy by simulating the propagation of an ultrasonic wave into an immersed and curved anisotropic laminate 3D specimen flawed with an internal circular delamination of varying size, thus showing the efficiency and the robustness of our approach.     

物联网环境下基于情境的语义Web服务选择

当前Web服务海量增加，物联网应用技术快速发展、不断普及，而现有的Web服务选择算法低效、用户匹配度低。针对该问题提出一种物联网环境下基于情境的语义Web服务选择方法。该方法应用QoS参数的无量纲化与语义Web服务动态选择方式，将物联网环境下服务与语义Web服务相结合，并根据用户需求针对QoS选择最优的服务集。实验表明，该方法能有效地提高用户服务动态选择的成功率。     

A simple explicit single step time integration algorithm for structural dynamics

In this article, a new single-step explicit time integration method is developed based on the Newmark approximations for the analysis of various dynamic problems. The newly proposed method is second-order accurate and able to control numerical dissipation through the parameters of the Newmark approximations. Explicitness and order of accuracy of the proposed method are not affected in velocity-dependent problems. Illustrative linear and nonlinear examples are used to verify performances of the proposed method.     

固体碳直接还原钢铁厂含锌固废的理论与实践

 钢铁厂内的含锌固废数量巨大，同时富含铁、碳等元素，是可循环再利用的二次资源。通过固体碳直接还原ZnO和FeO的热力学分析，发现在非标准状态下，ZnO的还原条件要优于FeO。为此，在实验室条件下设计了含锌固废在不同温度和时间下的还原试验，发现在还原温度为1 423 K、还原时间为15 min以上时，脱锌率可达到90%，而铁的金属化率需要在1 573 K时才能接近90%；在还原温度低于1 423 K时，还原时间对脱锌率的影响较大；在还原温度高于1 473 K时，还原温度对脱锌率影响较小，同时脱锌率可达到95%。这些结果对国内当前处理含锌固废主要工艺(回转窑、转底炉)的操作制度设置具有重要的参考价值，也为如何选择合理的工艺路线，以低投入、低运营成本实现含锌固废的再利用提供了理论依据。